NIIN Output Data
NIIN:
NSN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 482752 | 02280 | H | 5 | 9 | A | AX | ||
| 482752 | 49185 | A | 3 | 9 | 6 | AX |
CAGE Information
| Code | Company |
|---|---|
| 02280 | AMERICAN HOIST AND DERRICK CO |
| 49185 | TEREX AMERICAN CRANE CORP |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHNC | CONNECTION STYLE | RAISED SWIVEL W/ GASKET GROOVE 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 2ND END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CQGM | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH |
| AHNC | CONNECTION STYLE | RAISED SWIVEL W/ GASKET GROOVE 2ND END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.094 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.094 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.010 INCHES MINIMUM 1ST END AND 0.030 INCHES MAXIMUM 1ST END |
| AJED | RAISED FACE HEIGHT | 0.010 INCHES MINIMUM 2ND END AND 0.030 INCHES MAXIMUM 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 1ST END |
| AARX | INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| AJEE | RAISED FACE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SPLIT 2ND END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| AJEE | RAISED FACE DIAMETER | 2.000 INCHES NOMINAL 2ND END |
| CQBD | BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| ABKU | FLANGE THICKNESS | 0.560 INCHES NOMINAL 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| ABKU | FLANGE THICKNESS | 0.560 INCHES NOMINAL 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, BUNA-N |
| AFQN | FLANGE LENGTH | 3.120 INCHES NOMINAL 1ST END |
| AFQN | FLANGE LENGTH | 3.120 INCHES NOMINAL 2ND END |
| ABJH | TEMP RATING | -25.0 DEG FAHRENHEIT SINGLE RESPONSE AND 150.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| ADLH | SECOND END FITTING SPEC/STD DATA | SAE J518,TABLE 1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AGFF | FLANGE WIDTH | 2.780 INCHES NOMINAL 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 1ST END |
| CBBL | FEATURES PROVIDED | SELF-SEALING |
| AGFF | FLANGE WIDTH | 2.780 INCHES NOMINAL 2ND END |
| ADLG | FIRST END FITTING SPEC/STD DATA | SAE J518,TABLE 1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CRXX | MEASURING METHOD AND LENGTH | 187.125 INCHES MINIMUM WORKING AND 190.875 INCHES MAXIMUM WORKING |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 2ND END |
| CTCJ | FLANGE STYLE | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.312 INCHES NOMINAL 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |