NIIN Output Data
NIIN:
NSN:
Item Name:
SCREW , CLOSE TOLERANCE
Definition:
A SCREW, MACHINE OR SCREW, CAP, SOCKET HEAD WHOSE UNTHREADED PORTION IS OF SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001 IN.) (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS (1.000 IN.) (25 MM) OR LESS IN DIAMETER. ITEMS OVER (1.000 IN.) (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015 IN.) (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001 IN.) (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER. IT IS NOT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| NAS1163-7 |
80205 |
A |
3 |
2 |
4 |
SE |
|
|
| LK1163-7 |
26304 |
F |
5 |
9 |
4 |
KZ |
|
|
CAGE Information
| Code |
Company |
| 26304 |
TORKON FASTENER CORP |
| 80205 |
NATIONAL AEROSPACE STANDARDS COMMITT |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES THREADS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1163 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| AHYM |
NOMINAL THREAD DIAMETER |
0.190 INCHES |
| MATT |
MATERIAL |
PLASTIC LOCKING FEATURE |
| AASL |
HEAD DIAMETER |
0.328 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES BEARING SURFACE OF HEAD |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE FASTENER OR MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE FASTENER OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE FASTENER |
| CQBC |
MINIMUM TENSILE STRENGTH |
160000 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3A |
| SFTT |
SURFACE TREATMENT |
CADMIUM FASTENER AND CHROMATE FASTENER |
| AAUM |
LOCKING FEATURE |
PATCH THREADS OR PELLET THREADS OR STRIP THREADS |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| AASK |
HEAD STYLE |
FLAT COUNTERSUNK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.761 INCHES MINIMUM AND 0.791 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM |
| AAUR |
GRIP DIAMETER |
0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MATT |
MATERIAL |
STEEL COMP E4340 FASTENER OR STEEL COMP 4140 FASTENER OR STEEL COMP 8740 FASTENER |
| AASA |
THREAD LENGTH |
0.313 INCHES MINIMUM AND 0.363 INCHES MAXIMUM |
| ABQZ |
INTERNAL DRIVE STYLE |
OFFSET CRUCIFORM (TORQUE SET) |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
Similar Parts