NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 525341 | 98003 | R | 5 | 9 | 5 | KZ | ||
| 525341 | 33615 | A | 5 | 2 | 5 | KZ | ||
| 525341 | 34830 | A | 5 | 2 | 5 | ZZ | ||
| 525341 | 27068 | A | 5 | 2 | 5 | KZ | ||
| 525341 | 1RRL5 | A | C | 1 | 5 | 9F | ||
| 525341 | 11449 | F | 5 | 9 | 2 | KZ | ||
| 525341 | 81924 | A | 5 | 2 | 5 | ZZ | ||
| 525341 | 77445 | A | 3 | 2 | 2 | TU |
CAGE Information
| Code | Company |
|---|---|
| 11449 | TURBO POWER & MARINE SYSTEM INC SUB |
| 98003 | NIELSEN HARDWARE CORP |
| 33615 | SPARTAN AEROSPACE LLC |
| 34830 | ROGERSON KRATOS |
| 27068 | TRIPLE A SPRING LIMITED PARTNERSHIP |
| 1RRL5 | NIELSEN HARDWARE CORPORATION DBA NIE |
| 81924 | ATOMIC ENERGY COMMISSION OAK RIDGE O |
| 77445 | UNITED TECHNOLOGIES CORPORATION DBA |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 8630 OVERALL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| AAUB | HOLE DIAMETER | 0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES TOP |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD 1ST MATERIAL RESPONSE OVERALL AND AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR 66 FED STD 2ND MATERIAL RESPONSE OVERALL OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| HEAT | HEAT TREATMENT | AS FABRICATED |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BOTTOM |
| ADAV | OVERALL DIAMETER | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| ABNM | THICKNESS | 0.058 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |