NIIN Output Data
NIIN:
NSN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| AE700390-1 | 00624 | A | 3 | 2 | 2 | SE | ||
| 1241232-101 | 98441 | A | 5 | 2 | 2 | SE | ||
| R11368 | 50599 | A | 5 | 2 | 2 | TU | ||
| 3P91458-103 | 98897 | A | 1 | 2 | 2 | SE |
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
| 98441 | PARKER-HANNIFIN CORPORATION DBA STRA |
| 50599 | PARKER-HANNIFIN CORPORATION DBA STRA |
| 98897 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| AARX | INSIDE DIAMETER | 0.880 INCHES NOMINAL |
| ADLH | SECOND END FITTING SPEC/STD DATA | MIL MIL-F-27272,SIZE 16 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.380 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 219.0 |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL MIL-H-27267,SIZE 16Z SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRFY | FLOW ANGLE | 43.833 DEGREES 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAJD | THREAD CLASS | 3A 1ST END |
| CRSM | VACUUM IN TORR | 50.8 |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKV | OUTSIDE DIAMETER | 1.110 INCHES NOMINAL |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| MEDA | MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UN 2ND END |
| AAJD | THREAD CLASS | 3A 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| AAJP | OUTSIDE SURFACE TREATMENT | PASSIVATED |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 2ND END |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRXX | MEASURING METHOD AND LENGTH | 44.490 INCHES NOMINAL WORKING |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| FEAT | SPECIAL FEATURES | FITTING 945 PSI BURST PRESSURE,RESET,43 DEG TO 51 MIN ELBOW REVERSE |
| ADLG | FIRST END FITTING SPEC/STD DATA | MIL MIL-F-27272,SIZE 16Z SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
Similar Parts
AE700390-1 ,
AE7003901 ,
4720-00-933-5717 ,
4720009335717 ,
009335717
,
AE700390-1 ,
1241232-101 ,
R11368 ,
3P91458-103 ,