NIIN Output Data
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 13211E4779 | 97403 | A | 5 | 2 | 1 | PA | ||
| K300132 | 75377 | A | 3 | 2 | 5 | PA |
CAGE Information
| Code | Company |
|---|---|
| 75377 | KURZ & ROOT GENERATOR COMPANY LLC |
| 97403 | CECOM LR CENTER |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 1.125 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-18177,TYPE GEE MIL SPEC SINGLE MATERIAL RESPONSE BOARD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE |
| ABCS | TERMINAL ROW QUANTITY | 1 |
| MARK | SPECIAL MARKINGS | MARKED START,STOP,AND COMMON,ON,OPPOSITE SIDE,1,2 AND 3 |
| ABDB | TERMINAL FACILITY QUANTITY | 3 |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.625 INCHES |
| AAMA | MOUNTING HOLE DIAMETER | 0.219 INCHES |
| MATT | MATERIAL | GLASS FIBER BOARD AND PLASTIC EPOXY BOARD |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.250 INCHES |
| ABGN | BOARD OVERALL LENGTH | 4.000 INCHES |
| AAQL | BODY STYLE | STRIP TYPE |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.500 INCHES |
| CWLN | TERMINAL DESIGN | NONFEEDTHRU |
| CWLG | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES |
| ABGT | BOARD THICKNESS | 0.125 INCHES |
| ABGP | BOARD OVERALL WIDTH | 3.125 INCHES |
| AAPB | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 35.0 |