NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 99-041-9072218 | 96791 | H | C | 1 | 1 | ZZ | AC | |
| 99-041-9072218 | 04454 | A | 3 | 2 | 1 | TX | ||
| 1684-150 | 91637 | A | 5 | 2 | 5 | TX | ||
| 224S1-150 | 80294 | A | 5 | 1 | 3 | TX | ||
| 4912695-18 | 90536 | A | 1 | 2 | A | TX |
CAGE Information
| Code | Company |
|---|---|
| 04454 | SENSOR SYSTEMS L.L.C. |
| 96791 | BUNKER RAMO CORP AMPHENOL CONTROLS D |
| 91637 | VISHAY DALE ELECTRONICS INC. DIV VIS |
| 80294 | BOURNS INSTRUMENTS INC |
| 90536 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABXF | SHAFT LENGTH | 0.306 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ABKW | OVERALL HEIGHT | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND UNTHREADED HOLE |
| ADAQ | BODY LENGTH | 1.328 INCHES MINIMUM AND 1.360 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 90536-4912695 DRAWING |
| ADAT | BODY WIDTH | 0.375 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.095 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.0 OHMS SINGLE SECTION |
| ABTB | MOUNTING HOLE DIAMETER | 0.226 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| AAQL | BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AJYN | SCREW THREAD DIAMETER | 0.190 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 SOLDER STUD |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| APXH | TERMINAL LOCATION | REAR END |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| ABMK | OVERALL WIDTH | 0.375 INCHES MAXIMUM |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ADAU | BODY HEIGHT | 0.437 INCHES MINIMUM AND 0.469 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| ABHP | OVERALL LENGTH | 1.344 INCHES MINIMUM AND 1.662 INCHES MAXIMUM |