NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 0N091622-1 |
98230 |
A |
3 |
2 |
2 |
XN |
|
|
CAGE Information
| Code |
Company |
| 98230 |
NATIONAL SECURITY AGENCY |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSPY |
LARGEST STEP DIAMETER |
0.250 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
0.625 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
PLAIN |
| MATT |
MATERIAL |
STEEL COMP 303 |
| ATPC |
STEP QUANTITY |
2 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| FEAT |
SPECIAL FEATURES |
UNTHD HOLE DRILLED LONGITUDIONALLY THROUGH SHAFT 0.125 IN. DIA 0.579 IN. LG W/COUNTERBORE 0.195 IN.DIA,0.380 IN. DEEP,1ST IN. THROUGH CENTER REDUCING SIZE 0.053 IN. THK,PORTIONS 180 DEG APART |
| AMDL |
FIRST END DIAMETER |
0.0520 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
IDENTICAL |
Similar Parts