NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 65C35291-15 | 0ZLV2 | A | 5 | 2 | 5 | ZZ | ||
| 65C35291-15 | 98296 | F | 5 | 9 | 1 | SE | ||
| 123-4403540 PART 55 | 43689 | A | C | 1 | 9 | ZZ | AC | |
| 364A98B79-6 | 30001 | H | 5 | 9 | 5 | KE | ||
| 123-4498410 PART 55 | 43689 | A | C | 1 | 9 | ZZ | AC | |
| 64A98B79-6 | 11201 | A | 5 | 2 | 5 | KE | ||
| 64A98B79-6 | 10001 | A | 3 | 9 | 1 | SE |
CAGE Information
| Code | Company |
|---|---|
| 0ZLV2 | GSE SPARES INC. |
| 98296 | STANDARD MFG CO INC |
| 43689 | HUNTINGTON INGALLS INCORPORATED DIV |
| 30001 | RAMAR INC |
| 11201 | DEVAL CORPORATION |
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABNM | THICKNESS | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.750 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES TOP |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BOTTOM |
| AAUB | HOLE DIAMETER | 1.156 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY 268 OVERALL OR COPPER ALLOY 260 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613 FED SPEC ALL MATERIAL RESPONSES OVERALL |