NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 0N009345 |
98230 |
A |
3 |
2 |
1 |
AX |
|
|
CAGE Information
| Code |
Company |
| 98230 |
NATIONAL SECURITY AGENCY |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHG |
FIRST END GROOVE WIDTH |
0.0312 INCHES NOMINAL |
| AMFZ |
SECOND END DIAMETER |
0.3125 INCHES NOMINAL |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMGR |
SECOND END SLOT DEPTH |
0.109 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES |
| AAGZ |
FIRST END STYLE |
CIRCULAR GROOVED AND EXTERNALLY THREADED |
| AAHH |
FIRST END GROOVE DIAMETER |
0.1250 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKTN |
SECOND END SLOT WIDTH |
0.127 INCHES NOMINAL |
| CSPY |
LARGEST STEP DIAMETER |
0.312 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
3.594 INCHES NOMINAL |
| AMEA |
FIRST END EXTERNAL THREAD LENGTH |
0.273 INCHES NOMINAL |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
0.109 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.1640 INCHES NOMINAL |
| AMGS |
SECOND END HOLE DIAMETER |
0.0960 INCHES NOMINAL |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
0.273 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
4 |
| AAHP |
SECOND END STYLE |
CROSS DRILLED HOLE AND SLOTTED |
Similar Parts