NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 1829800007 | 57057 | A | 3 | 2 | 5 | TX | ||
| RV1-5-8S665 | 99957 | H | 5 | 9 | X | XX |
CAGE Information
| Code | Company |
|---|---|
| 57057 | NAVCOM DEFENSE ELECTRONICS INC. |
| 99957 | BOWMAR/TIC INC SUB OF BOWMAR INSTRUM |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| AJYN | SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 30.0 KILOHMS ALL SECTIONS |
| AEDX | SHAFT STYLE | ROUND |
| ABPA | UNDERCUT DIAMETER | 1.625 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AAVM | PILOT LENGTH | 0.0620 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 305.0 NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| AECZ | MOUNTING LIP DIAMETER | 1.6250 INCHES NOMINAL |
| AAPN | SECTION QUANTITY | 2 |
| ABXF | SHAFT LENGTH | 0.375 INCHES NOMINAL |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| ADAQ | BODY LENGTH | 1.718 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.5 FREE AIR ALL SECTIONS |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/+0.25 ALL SECTIONS |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.874 INCHES NOMINAL |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 ALL SECTIONS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -20.0/+20.0 ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 ALL SECTIONS |
| ABPC | UNDERCUT WIDTH | 0.0780 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.750 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TURRET |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |