NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 453728 | 19139 | A | 3 | 2 | 1 | CX |
CAGE Information
| Code | Company |
|---|---|
| 19139 | EASTMAN KODAK COMPANY DBA KODAK |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | EASTMAN KODAK CO VERSAMAT PROCESSOR MODEL 11C-L,11C-M,11C-MG |
| ABHP | OVERALL LENGTH | 1.062 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | EK-155 MFR REF SINGLE MATERIAL RESPONSE |
| AMFZ | SECOND END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SLOTTED |
| AAHX | SECOND END GROOVE DIAMETER | 0.2285 INCHES MINIMUM AND 0.2315 INCHES MAXIMUM |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.063 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AKTN | SECOND END SLOT WIDTH | 0.062 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | CHAMFERED 0.031 IN. BY 45 DEG BOTH ENDS |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.330 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.0280 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 5 |
| AMGR | SECOND END SLOT DEPTH | 0.045 INCHES NOMINAL |