NIIN Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 3191966-1 | 59364 | A | 5 | 2 | 5 | ZZ | ||
| 4D0003-5C | 88277 | A | 5 | 2 | C | ZZ | ||
| MM88111-5 | 58009 | A | 3 | 2 | 5 | ZZ | ||
| 3191966-1 | 77068 | R | 5 | 9 | 5 | KE | ||
| ACL22-5 | 10630 | A | 3 | 2 | 5 | ZZ | ||
| RA82001-5 | 17446 | A | 3 | 2 | 5 | ZZ | ||
| WCL22-5 | 56878 | A | 3 | 2 | 5 | KE |
CAGE Information
| Code | Company |
|---|---|
| 10630 | ANILLO INDUSTRIES INC. DBA ANILLO IN |
| 59364 | HONEYWELL INTERNATIONAL INC. DBA HON |
| 88277 | BOEING COMPANY THE DBA BOEING |
| 58009 | MOELLER MANUFACTURING & SUPPLY INC. |
| 77068 | ALLIED-SIGNAL INC DBA ALLIED-SIGNAL |
| 17446 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18729 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR AMS 5085 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQFM | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM |
| MATT | MATERIAL | STEEL COMP 4130 OVERALL OR STEEL COMP 1050 OVERALL |
| ABPX | MATERIAL THICKNESS | 0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.583 INCHES MINIMUM AND 0.603 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.314 INCHES MINIMUM AND 0.318 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESS |
| CSTM | RECESS ANGLE | 90.0 DEGREES NOMINAL |
| ABMD | RECESS DIAMETER | 0.402 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |