NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2100-3003 | 28480 | A | 5 | 9 | E | TX | ||
| 63MB15-5KL | 12697 | A | 5 | 2 | 5 | TX | ||
| WP/HORIZ MOUNT | 01121 | A | 5 | 9 | 5 | TX | ||
| 2100-3003 | 1LQK8 | A | 3 | 2 | 5 | ZZ | ||
| 382/B15 | 58756 | A | 5 | 1 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
| 28480 | HEWLETT PACKARD CO |
| 12697 | CLAROSTAT SENSORS AND CONTROLS |
| 1LQK8 | AGILENT TECHNOLOGIES INC. DIV AGILEN |
| 58756 | CTS CORP ELECTROMECHANICAL DIV |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 295.0 NOMINAL |
| AAPN | SECTION QUANTITY | 1 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 48.00 INCH-OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING AND TERMINAL |
| AAQL | BODY STYLE | RECTANGULAR W/BUSHING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 295.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.557 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.500 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL |
| ZZZK | SPECIFICATION/STANDARD DATA | 28480-B2100-3003-1 MANUFACTURERS SPECIFICATION |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| CBME | CUBIC MEASURE | 0.393 CUBIC INCHES |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.057 INCHES NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABKW | OVERALL HEIGHT | 0.743 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| ADAU | BODY HEIGHT | 0.618 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| ABJT | TERMINAL LENGTH | 0.125 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 28480-B2100-3003-1 DRAWING |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |