NIIN Output Data
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| PFW-375 | 94882 | A | 5 | 1 | 5 | HD | ||
| 2508835 | 10001 | A | 3 | 1 | 1 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
| 94882 | JERGENS, INC. TOOLING COMPONENTS DIV |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZW |
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | OD BEVELED 0.030 IN. BY 45 DEG,WASHER CYANIDE HARDENED 0.005 TO 0.008 IN. DEEP |
| CQJW | TOP RECESS DIAMETER | 0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| ABKV | OUTSIDE DIAMETER | 0.875 INCHES NOMINAL |
| HUES | COLOR | BLACK OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 12L14 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS DIFFERENTIATED BY SPECIAL QUALITY CONTROL TESTING FOR MK 48 TORPEDO |
| CSML | BOTTOM RECESS DIAMETER | 0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
| SFTT | SURFACE TREATMENT | OXIDE FILM OVERALL |
| AAUB | HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |