NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 051582 | 34228 | A | 3 | 2 | A | AX | ||
| 887B051582 | 34228 | A | 5 | 9 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 34228 | KOLLMORGEN CORPORATION DBA KOLLMORGE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAGZ | FIRST END STYLE | PLAIN |
| MATT | MATERIAL | STEEL COMP 303 |
| ABHP | OVERALL LENGTH | 28.125 INCHES MINIMUM AND 28.375 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| CSPY | LARGEST STEP DIAMETER | 0.247 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AMDL | FIRST END DIAMETER | 0.1850 INCHES MINIMUM AND 0.1860 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| AAHN | END SIMILARITY | IDENTICAL |