NIIN Output Data
NIIN:
NSN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 209-040-110-9 | 97499 | A | 3 | 2 | 4 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQFM | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 14 STUD THREAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES STUD THREAD |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| MATT | MATERIAL | STEEL COMP E4340 |
| AASA | THREAD LENGTH | 0.875 INCHES MINIMUM STUD THREAD AND 1.018 INCHES MAXIMUM STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| AASA | THREAD LENGTH | 0.938 INCHES MINIMUM NUT THREAD AND 1.038 INCHES MAXIMUM NUT THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| ABHP | OVERALL LENGTH | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHANK |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.186 INCHES NOMINAL FIRST HOLE |
| CMLP | THREAD QUANTITY PER INCH | 20 NUT THREAD |
| ADDV | COTTER PIN HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| AAJE | THREAD PITCH DIAMETERS | +0.4052/+0.4067 INCHES STUD THREAD |