NIIN Output Data
Definition:
A GROUPING OF TWO OR MORE PHYSICALLY CONNECTED OR RELATED ELECTRICAL AN/OR ELECTRONIC PARTS CAPABLE OF DISSASSEMBLAGE. EACH COMPONENT OF THE ASSEMBLAGE MUST BE CAPABLE OF FUNCTIONING IN ACCORDANCE WITH ITS OWN ITEM NAME. CONSISTS OF A SINGLE PRINTED CIRCUIT BOARD OR TERMINAL BOARD UPON WHICH ARE MOUNTED SEPARATELY MANUFACTURED ELECTRONIC COMPONENTS SUCH AS CAPACITORS, INDUCTORS, RESISTORS, AND THE LIKE. IT MAY ALSO INCLUDE PRINTED ELECTRONIC COMPONENTS. THE ITEM IS GENERALLY PART OF A SUBASSEMBLY AND CANNOT BE ASSIGNED A MORE DEFINITE ITEM NAME. FOR ITEMS HAVING A COMPLETE INDIVIDUAL ELECTRICAL/ELECTRONIC FUNCTION, USE APPLICABLE ITEM NAME SUCH AS AMPLIFIER (AS MODIFIED); POWER SUPPLY; OR THE LIKE. FOR ITEMS NOT HAVING A COMPLETE INDIVIDUAL ELECTRICAL/ELECTRONIC FUNCTION, SEE APPLICABLE SUBASSEMBLY NAME, SUCH AS AMPLIFIER SUBASSEMBLY; POWER SUPPLY SUBASSEMBLY; OR THE LIKE. FOR AN ASSEMBLY OF ELECTRICAL/ELECTRONIC COMPONENTS MOUNTED ON OTHER THAN A SINGLE PRINTED WIRING BOARD, SEE ELECTRONIC COMPONENTS ASSEMBLY. EXCLUDES PRINTED CIRCUIT BOAR
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| SM-D-776525 | 80063 | A | 3 | 2 | 5 | CL |
CAGE Information
| Code | Company |
|---|---|
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
ELECTRICAL AND ELECTRONIC ASSEMB
Inclusions:
Exclusions:
EXCLUDES CIRCUIT CARD AND ELECTRONIC COMPONENT ASSEMBLIES WHICH CAN BE IDENTIFIED TO A MORE DEFINITIVE APPROVED ITEM NAME.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | INSULATIVE MOUNTING PADS AND SUPPORTING CONNECTOR PLUG SHALL BE FREE OF CONFORMAL COATING; MAJOR COMPONENTS:CAPACITORS 5, RESISTORS 3, MICROCIRCUITS 12, INDICATOR LAMPS 10, CONNECTOR PLUG 1, CONNECTOR TESTPOINT MOUNTED ON A COMMON PRINTED WIRING BOARD 1; MOUNTING CONFIGURATION:SLIDE-IN, PLUG-IN PRINTED CIRCUIT BOARD WITH TWO THUMB-DEPESS, TOP MOUNTED EJECTORS; SPECIAL TEST FEATURES:STANDARD TEST CONDITIONS REFERENCED HEREIN ARE AS FOLLOWS:TEMPERATURE 25 DEGREES C PORM 10 DEGREES C RELATIVE HUMIDITY 90 PER CENT ATMOSPHERIC PRESSURE 23.22 TO 31.42 INCHES OF MERCURY. CALIBRATION OF ALL TEST EQUIPMENT SHALL BE I.A.W. MIL-C-45662. DRAWING ENGINEERING TOLERANCES ARE ABSOLUTE UNLESS OTHERWISE SPECIFIED |
| ABHP | OVERALL LENGTH | 5.500 INCHES NOMINAL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-P-46843 SPECIFICATION |
| ABMK | OVERALL WIDTH | 4.000 INCHES NOMINAL |