NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 95470-0035 | 17454 | A | 3 | 9 | 6 | ZZ | ||
| 95-470-0035-4 | 17454 | A | 5 | 9 | 2 | AX |
CAGE Information
| Code | Company |
|---|---|
| 17454 | PHILADELPHIA GEAR CORPORATION DIV CO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| CSPY | LARGEST STEP DIAMETER | 7.268 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| ABHP | OVERALL LENGTH | 8.200 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLAT KEYWAY |
| AMDL | FIRST END DIAMETER | 1.6250 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 2.690 INCHES NOMINAL |
| AMDG | FIRST END KEYWAY DEPTH | 2.690 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.3800 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 1045 FED STD SINGLE MATERIAL RESPONSE |
| AAHN | END SIMILARITY | IDENTICAL |