NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| JM39015/3-007XR | 84048 | A | 5 | 2 | 6 | 9Z | ||
| MIL-R-39015/3 | 81349 | M | 4 | 1 | 3 | TX | ||
| M39015/3-007XR | 81349 | M | 2 | 2 | 3 | TX | ||
| 010726023 | 92110 | A | 5 | 1 | 4 | ZZ | ||
| RTR24DX102R | 81349 | M | 5 | 1 | 3 | TX | ||
| JM39015/3-007XR | 81349 | M | 5 | 2 | 4 | 9Z | ||
| M39015/3-007XP | 81349 | M | 5 | 9 | 3 | TX |
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
| 84048 | VERNITRON CORP VRN INTERNATIONAL DIV |
| 92110 | SERVO CORPORATION OF AMERICA |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39015/3 GOVERNMENT SPECIFICATION |
| AAPN | SECTION QUANTITY | 1 |
| ABKW | OVERALL HEIGHT | 0.720 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.145 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| ABWV | SHAFT DIAMETER | 0.065 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CBME | CUBIC MEASURE | 0.027 CUBIC INCHES |
| ABXF | SHAFT LENGTH | 0.050 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AAQL | BODY STYLE | RECTANGULAR |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39015 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ADAU | BODY HEIGHT | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 KILOHMS SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.172 INCHES MINIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 3600.0 MINIMUM AND 9000.0 MAXIMUM |
| ABMK | OVERALL WIDTH | 0.170 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 3600.0 MINIMUM AND 9000.0 MAXIMUM |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABHP | OVERALL LENGTH | 0.455 INCHES NOMINAL |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |