NIIN Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 4846138-8 | 0AHU0 | A | 3 | 2 | 4 | AX | ||
| 4846138 | 0AHU0 | A | D | 9 | 2 | AX |
CAGE Information
| Code | Company |
|---|---|
| 0AHU0 | KALMAR AC INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 5.120 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 5.125 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.250 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.3650 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| AMGS | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SECOND END TAP DRILL 2.500 IN. DP,0.250-28 UNF 2-B THD BY 0.380 IN. DP |
| AAHP | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED |
| AAHX | SECOND END GROOVE DIAMETER | 0.5000 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.5000 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.3650 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 1113 |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.250 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.6250 INCHES NOMINAL |