NIIN Output Data
Definition:
AN ELECTRICAL FITTING WITH ELECTRICAL CONTACTS CONSTRUCTED TO BE AFFIXED TO THE END OF A CABLE, CONDUIT, COAXIAL LINE, CORD, WIRE (INCLUDES PRINTED/ETCHED), PRINTED WIRING BOARD, OR THE LIKE FOR CONVENIENCE IN JOINING WITH ANOTHER ELECTRICAL CONNECTOR(S) OR PRINTED WIRING BOARD. IT IS DESIGNED TO BE MOUNTED ON A BULKHEAD, CHASSIS, PANEL, WALL, PRINTED WIRING BOARD, OR THE LIKE. EXCLUDES LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (AS MODIFIED) AND SOCKET, PLUG-IN ELECTRONIC COMPONENTS. SEE ALSO WIRING HARNESS (AS MODIFIED) AND CABLE ASSEMBLY (AS MODIFIED). FOR ITEMS WITH TERMINATION WIRES OF MORE THAN FOUR INCHES IN LENGTH, SEE LEAD ASSEMBLY, ELECTRICAL. FOR ITEMS WITHOUT INSERTS, SEE SHELL, ELECTRICAL CONNECTOR.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| KA-19-100 | 91836 | A | 3 | 9 | 1 | TX |
CAGE Information
| Code | Company |
|---|---|
| 91836 | WINCHESTER ELECTRONICS CORPORATION D |
Federal Supply Class
Title
CONNECTORS, ELECTRICAL
Inclusions:
INCLUDES PLUGS; JACKS; RECEPTACLES, ELECTRONIC COMPONENT SOCKETS AND ASSOCIATED ACCESSORIES
Exclusions:
EXCLUDES INTERCONNECTORS, FIBER OPTIC
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| PMLC | PRECIOUS MATERIAL AND LOCATION | CONTACT AND SHELL SURFACES SILVER |
| CQYH | CONTACT SURFACE TREATMENT | SILVER SINGLE MATING END SINGLE CONTACT GROUPING |
| PRMT | PRECIOUS MATERIAL | SILVER |
| AFQW | MATING END QUANTITY | 1 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.500 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.240 INCHES NOMINAL |
| CSGF | CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| ABMK | OVERALL WIDTH | 0.690 INCHES NOMINAL |
| AFRT | SHELL TYPE | SOLID |
| AAQL | BODY STYLE | STRAIGHT SHAPE W/CABLE CLAMP |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AFRY | RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKW | OVERALL HEIGHT | 0.690 INCHES NOMINAL |
| CXCL | INCLUDED CONTACT TYPE | COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| CTHH | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE |
| CSCF | TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| CQZG | INSERT MATERIAL | PLASTIC TETRAFLUOROETHYLENE SINGLE MATING END |
| CQTM | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| AFQR | THREADED DEVICE TYPE | MOUNTING HOLE |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | BNC SINGLE MATING END |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| CQTZ | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| ABKH | BUSHING DIAMETER | 0.440 INCHES NOMINAL |
| CRBJ | CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365A FED SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CSPT | SHELL MATERIAL | COPPER ALLOY |
| CMLP | THREAD QUANTITY PER INCH | 56 |
| CTBC | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365A FED SPEC SINGLE TREATMENT RESPONSE |
| AFRW | CONNECTOR CABLE STRAIN RELIEF METHOD | COMPRESSION NUT |
| AFQZ | CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CQJX | NOMINAL THREAD SIZE | 0.099 INCHES |
| AAJD | THREAD CLASS | 2B |
| CSWM | SHELL SURFACE TREATMENT | SILVER |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | 0.105 SILVER GRAINS, TROY |
| AFRV | CONNECTOR LOCKING METHOD | BAYONET PIN |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.500 INCHES NOMINAL |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.550 INCHES NOMINAL |
| CXCG | INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |