NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 9810145-05 | K0479 | R | 5 | 2 | 2 | ZK | ||
| 9810145-0-5804 | D9182 | A | C | 1 | 6 | ZZ | AC | |
| PL CM/10-94 IT39 | 10855 | A | C | 1 | 6 | ZZ | AC | |
| 981045-0-5804 | 81860 | A | C | 1 | 6 | ZZ | AC | |
| 9810145-05 | 81860 | A | 3 | 2 | 5 | KZ | ||
| 9810145-05 | 13636 | A | 5 | 9 | 5 | KZ | ||
| SB2000SERIES PG66 | 81860 | A | C | 1 | 6 | ZZ | AC | |
| 9810145-05804 | 81860 | A | 5 | 2 | 1 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 10855 | CARRIER CORPORATION DIV CARRIER TRAN |
| K0479 | BARRY CONTROLS LTD |
| D9182 | BOSCH REXROTH GMBH LOHMANN STOLTERFO |
| 81860 | BARRY WRIGHT CORPORATION DBA BARRY C |
| 13636 | BARRY WRIGHT CORPORATION DBA BARRY C |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| SFTT | SURFACE TREATMENT | ZINC OVERALL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| MATT | MATERIAL | STEEL OVERALL |
| ABNM | THICKNESS | 0.375 INCHES NOMINAL |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | BARRY 804,FSCM 81860 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| ADAV | OVERALL DIAMETER | 5.210 INCHES MINIMUM AND 5.290 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 1.063 INCHES NOMINAL |