NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2046392-2 | 70210 | A | 3 | 2 | 1 | KE |
CAGE Information
| Code | Company |
|---|---|
| 70210 | HONEYWELL INTERNATIONAL INC. DBA HON |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 1.460 INCHES MINIMUM AND 1.470 INCHES MAXIMUM |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AMDL | FIRST END DIAMETER | 0.3850 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.4182 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.960 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.1800 INCHES NOMINAL |
| BDSQ | FIRST END SPLINE QUANTITY | 23 |
| ZZZV | FSC APPLICATION DATA | DRIVE,MECHANICAL,FLAP,LE,WING |
| ATPC | STEP QUANTITY | 5 |
| AMDS | FIRST END PITCH DIAMETER | 0.4792 INCHES NOMINAL |