NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 2666735 | 06848 | A | 3 | 2 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 06848 | HONEYWELL INTERNATIONAL INC. AEROSPA |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 2.030 INCHES NOMINAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| FEAT | SPECIAL FEATURES | FIRST END BORED,0.097 IN. DIA,0.140 IN. DP;FIRST END INT HEX,0.090 IN. W ACROSS FLATS,0.110 IN. DP |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| CSPY | LARGEST STEP DIAMETER | 0.180 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMFZ | SECOND END DIAMETER | 0.0900 INCHES NOMINAL |
| AMGS | SECOND END HOLE DIAMETER | 0.0312 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.1800 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |