NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 723042 | 99167 | A | 5 | 9 | 2 | AZ | ||
| 723042 | 45153 | C | 3 | 2 | 2 | AZ | ||
| 723042 | 58163 | A | 3 | 2 | 5 | AZ |
CAGE Information
| Code | Company |
|---|---|
| 45153 | HAMILTON SUNDSTRAND CORPORATION DIV |
| 99167 | HAMILTON SUNDSTRAND CORPORATION |
| 58163 | MEGGITT NORTH HOLLYWOOD INC. DBA MEG |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| ABHP | OVERALL LENGTH | 5.504 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640,TYPE 1 ASSN STD SINGLE MATERIAL RESPONSE |
| ATPC | STEP QUANTITY | 7 |
| MATT | MATERIAL | STEEL COMP 303 |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.250 INCHES NOMINAL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 0.620 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-061-2445 |
| AMFT | SECOND END KEYWAY DEPTH | 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| CSPY | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| AAHP | SECOND END STYLE | FLAT KEYWAYS AND INTERNALLY THREADED |
| AMFR | SECOND END KEYWAY WIDTH | 0.1260 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 0.781 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | CORROSION RESISTING STEEL |
| AMFZ | SECOND END DIAMETER | 0.6220 INCHES MINIMUM AND 0.6280 INCHES MAXIMUM |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.487 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNALLY THREADED AND INDENTED FLAT KEYWAY |
| AMDL | FIRST END DIAMETER | 0.6640 INCHES NOMINAL |
| SUPP | SUPPLEMENTARY FEATURES | TWO (2) HOLES,0.030 IN. NOMINAL DIA,DRILLED THROUGH TO ID OF UNTHREADEDHOLE,LOCATED 1.406 IN. AND 3.752 IN. FROM FIRST END,AND ON OPPOSITE SIDES OFHOLE |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1350 INCHES MINIMUM AND 0.1450 INCHES MAXIMUM |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 1.406 INCHES NOMINAL |
| AMDG | FIRST END KEYWAY DEPTH | 0.039 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |