NIIN Output Data
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 639AS516-1 | 30003 | A | 3 | 2 | 2 | SB |
CAGE Information
| Code | Company |
|---|---|
| 30003 | NAVAL AIR SYSTEMS COMMAND |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | MAGNESIUM ALLOY AZ31B OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| BZRR | THREAD SERIES | UNS |
| ADBM | DRIVE POINT QUANTITY | 2 |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRSQ | COUNTERSINK ANGLE | 85.0 DEGREES MINIMUM OVERALL AND 90.0 DEGREES MAXIMUM OVERALL |
| ADBH | DRIVE POINT WIDTH | 0.061 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| AZKQ | TEMP RATING | NOT RATED |
| ADBG | NUT THICKNESS | 0.081 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-M-31 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 64 |
| AAJD | THREAD CLASS | 2B |
| ABQU | DRIVE POINT DEPTH | 0.034 INCHES NOMINAL |
| ACTD | NUT DIAMETER | 0.356 INCHES MINIMUM AND 0.362 INCHES MAXIMUM |