NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 6321-0086-01 | 17472 | A | 3 | 2 | 1 | KE |
CAGE Information
| Code | Company |
|---|---|
| 17472 | EATON CORPORATION DIV ELECTRICAL SEN |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDG | FIRST END KEYWAY DEPTH | 0.444 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.500 INCHES NOMINAL |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.312 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | FLAT KEYWAY |
| AMFZ | SECOND END DIAMETER | 0.3736 INCHES MINIMUM AND 0.3746 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| ZZZV | FSC APPLICATION DATA | ACTUATOR,ELECTRO-MECHANICAL,ROTARY-CANOPY |
| ABHP | OVERALL LENGTH | 3.000 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SQUARE (ROUND CORNERS) |
| ACMD | SECOND END WIDTH ACROSS FLATS | 0.198 INCHES NOMINAL |
| CTBM | SECOND END STEP LENGTH | 0.679 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.2488 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| AMCZ | FIRST END KEYWAY WIDTH | 0.6150 INCHES MINIMUM AND 0.6300 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 5 |