NIIN Output Data
Definition:
A FLAT METAL OR PLASTIC ITEM OF VARIOUS PERIPHERAL SHAPES HAVING A SOLID (NOT LAMINATED) CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. FOR ROUND ITEMS WITHOUT A HOLE HAVING A SOLID RECTANGULAR CROSS-SECTION USE DISK, SOLID, PLAIN. FOR ROUND OR HEXAGONAL ITEMS WITH ONLY ONE HOLE CENTRALLY LOCATED AND WITH THE LENGTH (THICKNESS) EXCEEDING 25 PERCENT OF THE OUTSIDE DIAMETER OR DISTANCE ACROSS PERIPHERAL FLATS, SEE SPACER, SLEEVE. THE THICKNESS BETWEEN THE TWO PARALLEL BEARING SURFACES MUST BE 0.006 INCH, (0.152 MM) OR MORE FOR ITEMS LESS THAN 1/4 INCH (6.35 MM) ACROSS THE PERIPHERAL DIAMETER, OR SMALLEST OVERALL OUTSIDE DIMENSION, OR MUST BE 0.016 INCH (0.406 MM) OR MORE FOR ITEMS 1/4 INCH (6.35 MM) OR GREATER ACROSS THE PERIPHERAL DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION. FOR ITEMS WITH A THICKNESS LESS THAN THOSE INDICATED ABOVE, SEE SHIM. FOR ITEMS WITH ONE HOLE CENTRALLY LOCATED CONFORMING TO THE ABOVE DIMENSIONAL CRITERIA USE WASHER, FLAT OR SPACER, RING AS APPLICABLE. WHEN THICKNESS AND/OR OUTSIDE DIAMETER OR SMALLEST OVERALL OUTSIDE DIMENSION IS DESIGNATED AS A TOLERANCE/DIMENSION THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE. EXCLUDES GASKET; INSULATOR (AS MODIFIED) AND MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 9528M95P01 | 07482 | A | 3 | 2 | 2 | SB | ||
| 9528M95P01 | 03350 | A | 5 | 9 | 5 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 03350 | GENERAL ELECTRIC COMPANY DBA GE STRU |
| 07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | NON-CIRCULAR W/SQUARE CORNERS |
| ABMK | OVERALL WIDTH | 0.620 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | F-101 ENGINE,B-1B ACFT |
| AECS | BOLT HOLE QUANTITY | 2 |
| FEAT | SPECIAL FEATURES | 2 CORNERS ALONG LG CHAMFERED 0.200-0.230 IN. BY 45.0 DEG |
| AAUB | HOLE DIAMETER | 0.294 INCHES MINIMUM AND 0.303 INCHES MAXIMUM |
| ADVJ | BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.850 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5599 ASSN STD SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | NICKEL ALLOY 625 |
| ABHP | OVERALL LENGTH | 1.610 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |