NIIN Output Data
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| SL7026 | 97393 | A | 3 | 2 | 2 | SB | ||
| 9733M59P04 | 07482 | A | 1 | 2 | 2 | SB |
CAGE Information
| Code | Company |
|---|---|
| 07482 | GENERAL ELECTRIC COMPANY DBA GE DIV |
| 97393 | SHUR-LOK COMPANY DBA SPS FASTENER DI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| ADBM | DRIVE POINT QUANTITY | 12 |
| ABQU | DRIVE POINT DEPTH | 0.080 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | ANY ACCEPTABLE |
| CQFM | HARDNESS RATING | NOT RATED |
| ACTD | NUT DIAMETER | 2.230 INCHES MINIMUM AND 2.250 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | NOT RATED |
| CQJX | NOMINAL THREAD SIZE | 1.750 INCHES |
| BZRR | THREAD SERIES | UNJ |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ACTA | NUT STYLE | ROUND |
| ADBG | NUT THICKNESS | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6370 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ADBJ | UNDERCUT THICKNESS | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2B |
| ADBH | DRIVE POINT WIDTH | 0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ABPH | SMALL END DIAMETER | 2.070 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |