NIIN Output Data
NIIN:
NSN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| FF-W-100 | 81348 | M | 4 | 1 | 4 | KZ | ||
| MS35333-35B | 96906 | M | 5 | 9 | 4 | KZ | ||
| NASM35333-35B | 80205 | A | 3 | 2 | 5 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 80205 | NATIONAL AEROSPACE STANDARDS COMMITT |
| 81348 | FEDERAL SPECIFICATIONS PROMULGATED B |
| 96906 | MILITARY STANDARDS PROMULGATED BY MI |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | STEEL COMP 1050 OVERALL OR STEEL COMP 1054 OVERALL OR STEEL COMP 1059 OVERALL OR STEEL COMP 1053 OVERALL OR STEEL COMP 1055 OVERALL OR STEEL COMP 1060 OVERALL OR STEEL COMP 1064 OVERALL |
| STYL | STYLE DESIGNATOR | FLAT INTERNAL TEETH |
| ABKV | OUTSIDE DIAMETER | 0.175 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES OVERALL |
| AAUB | HOLE DIAMETER | 0.089 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | A GRADE AND 1 TYPE AND 1 COMPOSITION |
| CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM |
| SFTT | SURFACE TREATMENT | CHROMIUM OVERALL |
| ABPX | MATERIAL THICKNESS | 0.010 INCHES MINIMUM AND 0.015 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-14538 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |