NIIN Output Data
Definition:
A WASHER HAVING A CENTRALLY LOCATED HOLE WITH A SOLID OR LAMINATED CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE HOLE MUST BE 75 PERCENT OR LESS THAN THE LARGEST DIMENSION AND THE BEARING SURFACE FINISH IS GREATER THAN 32 MICROINCH (0.8 MICROMETER). THE THICKNESS CANNOT EXCEED 25 PERCENT OF THE LARGEST OUTSIDE DIMENSION. WHEN THE LARGEST OUTSIDE DIMENSION IS LESS THAN 1/4 INCH OR 6MM, THE THICKNESS MUST BE 0.006 INCHES (0.15MM) OR GREATER AND FOR ITEMS 1/4 INCH (6MM) OR LARGER, THE THICKNESS MUST BE 0.016 INCHES (0.4MM) OR GREATER. THE MAXIMUM TOLERANCE IS APPLIED TO DIMENSIONS AND USED AS A DETERMINING FACTOR. ITEMS WITH SEPARABLE LAMINATION USE SHIM. FOR ITEMS FABRICATED FROM CERAMIC OR ELECTRICALLY RATED MATERIALS BY SPECIFICATION OR INDUSTRY STANDARDS USE INSULATOR (1), WASHER. EXCLUDES DISK, VALVE, GRAPHITE IMPREGNATED AND LUBRICATED ITEMS.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| A3013124-5 | 51792 | A | 3 | 2 | A | KZ | ||
| A3013124-5 | 80063 | A | 7 | 2 | A | KZ |
CAGE Information
| Code | Company |
|---|---|
| 51792 | COLUMBIA NUT & BOLT LLC |
| 80063 | US ARMY COMMUNICATIONS & ELECTRONICS |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABNM | THICKNESS | 0.924 MILLIMETERS MINIMUM AND 1.076 MILLIMETERS MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| CQBC | MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| ABMX | CENTER HOLE SHAPE STYLE | ROUND |
| ABMW | PERIPHERAL SHAPE STYLE | ROUND |
| MATT | MATERIAL | STEEL COMP 384 OVERALL OR STEEL COMP 348 OVERALL OR STEEL COMP 347 OVERALL OR STEEL COMP 304L OVERALL OR STEEL COMP 303SE OVERALL OR STEEL COMP 317 OVERALL OR STEEL COMP 321 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 316L OVERALL OR STEEL COMP 310S OVERALL OR STEEL COMP 310 OVERALL OR STEEL COMP 309S OVERALL OR STEEL COMP 305 OVERALL OR STEEL COMP 308 OVERALL OR STEEL COMP 309 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 3310H OVERALL OR STEEL COMP 301 OVERALL OR STEEL COMP 302B OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 314 OVERALL OR STEEL COMP 3140 OVERALL OR STEEL COMP 385 OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| ADAV | OVERALL DIAMETER | 9.88 MILLIMETERS MINIMUM AND 10.12 MILLIMETERS MAXIMUM |