NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 70K1G048R103U | 01121 | A | 5 | 9 | A | TX | ||
| 70K1GO48R103U | 12697 | A | 3 | 2 | 5 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
| 12697 | CLAROSTAT SENSORS AND CONTROLS |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAU | BODY HEIGHT | 0.625 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RIGHT-LEFT ADJACENT SIDES |
| AEEA | SWITCH TYPE | ROTARY |
| AAPN | SECTION QUANTITY | 1 |
| AEGJ | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, ONE OPEN, ONE CLOSED |
| AEDX | SHAFT STYLE | ROUND |
| ABKW | OVERALL HEIGHT | 0.625 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ADAQ | BODY LENGTH | 0.941 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 KILOHMS SINGLE SECTION |
| AEFM | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| ADAT | BODY WIDTH | 0.625 INCHES NOMINAL |
| AEGH | SWITCH OPERATING POSITION | END OF ROTATION |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AEFP | NONTURN DEVICE RADIUS | 0.305 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AGAV | END ITEM IDENTIFICATION | STRAINER SEDI |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | 1.691 INCHES NOMINAL |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0/+3.5 -25 DEG CELSIUS SINGLE SECTION AND +0.0/+2.0 0 DEG CELSIUS SINGLE SECTION AND +0.0/+7.0 -55 DEG CELSIUS SINGLE SECTION AND -2.5/+2.5 85 DEG CELSIUS SINGLE SECTION AND +0.0/+5.5 120 DEG CELSIUS SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| CBME | CUBIC MEASURE | 1.090 CUBIC INCHES |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 FREE AIR SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABMK | OVERALL WIDTH | 1.031 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CBBL | FEATURES PROVIDED | SWITCH |