NIIN Output Data
NIIN:
NSN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number |
CAGE |
Status |
RNCC |
RNVC |
DAC |
RNAAC |
MSDS |
SADC |
| 219F105 |
05606 |
A |
3 |
2 |
2 |
9Z |
|
|
CAGE Information
| Code |
Company |
| 05606 |
GENERAL DYNAMICS ARMAMENT AND TECHNI |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AMGC |
SECOND END SPLINE MAJOR DIAMETER |
0.8418 INCHES MINIMUM AND 0.9062 INCHES MAXIMUM |
| AAHX |
SECOND END GROOVE DIAMETER |
0.5410 INCHES MINIMUM AND 0.5510 INCHES MAXIMUM |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL OR STEEL COMP 4140 |
| ATPC |
STEP QUANTITY |
7 |
| AMGB |
SECOND END SPLINE MINOR DIAMETER |
0.7640 INCHES NOMINAL |
| BDSR |
SECOND END SPLINE QUANTITY |
27 |
| AMFZ |
SECOND END DIAMETER |
0.6250 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| CSPY |
LARGEST STEP DIAMETER |
0.8720 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AAHH |
FIRST END GROOVE DIAMETER |
0.5410 INCHES MINIMUM AND 0.5510 INCHES MAXIMUM |
| AAHW |
SECOND END GROOVE WIDTH |
0.0781 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
| AMDP |
FIRST END SPLINE MAJOR DIAMETER |
0.7499 INCHES MINIMUM AND 0.7501 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
11.1719 INCHES MINIMUM AND 11.2031 INCHES MAXIMUM |
| AMDM |
FIRST END SPLINE LENGTH |
1.2188 INCHES MINIMUM AND 1.2812 INCHES MAXIMUM |
| AMFQ |
SECOND END DISTANCE FROM END TO GROOVE |
0.6250 INCHES MINIMUM AND 0.6406 INCHES MAXIMUM |
| AMCY |
FIRST END DISTANCE FROM END TO GROOVE |
0.6250 INCHES MINIMUM AND 0.6406 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| AMGA |
SECOND END SPLINE LENGTH |
1.2188 INCHES MINIMUM AND 1.2812 INCHES MAXIMUM |
| BDSQ |
FIRST END SPLINE QUANTITY |
23 |
| AMDN |
FIRST END SPLINE MINOR DIAMETER |
0.6390 INCHES NOMINAL |
| AMDL |
FIRST END DIAMETER |
0.6250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM-A322 ASSN STD 1ST MATERIAL RESPONSE OR ASTM-A331 ASSN STD 2ND MATERIAL RESPONSE OR ASTM-A331 ASSN STD 3RD MATERIAL RESPONSE |
| CSYM |
SURFACE FINISH |
250.0 MICROINCHES |
| AAHG |
FIRST END GROOVE WIDTH |
0.0781 INCHES MINIMUM AND 0.1000 INCHES MAXIMUM |
Similar Parts