NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 20M243 | 01121 | A | 3 | 9 | E | TX |
CAGE Information
| Code | Company |
|---|---|
| 01121 | ROCKWELL AUTOMATION INC. |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADAU | BODY HEIGHT | 0.625 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AAPN | SECTION QUANTITY | 1 |
| AEDX | SHAFT STYLE | ROUND |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| ABXF | SHAFT LENGTH | 1.625 INCHES NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL |
| ADAQ | BODY LENGTH | 1.185 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.625 INCHES NOMINAL |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5760.0 NOMINAL |
| AEFP | NONTURN DEVICE RADIUS | 0.305 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 100.0 SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFL | MAXIMUM RUNNING TORQUE | 3.00 INCH-OUNCES |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 50.0 KILOHMS SINGLE SECTION |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 3.00 INCH-OUNCES |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0/+100.0 SINGLE SECTION |
| FEAT | SPECIAL FEATURES | VERNIER DRIVE 16 TO 1 RATIO |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.200 INCHES NOMINAL |