NIIN Output Data
NIIN:
NSN:
Item Name:
RESISTOR , FIXED , WIRE WOUND , INDUCT
Definition:
INC 37403 REINSTATED ON 010303~A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF-SUPPORTING. THE ITEM MUST HAVE INHERENT CHARACTERISTICS OF INDUCING SELF-INDUCTANCE. OPPOSITION TO CURRENT FLOW IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFESTED BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE. SEE ALSO RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| L03966 | 16236 | A | 3 | 2 | A | TX | ||
| A6611761-3900OHM | 52022 | F | 5 | 9 | A | TX |
CAGE Information
| Code | Company |
|---|---|
| 16236 | DLA LAND AND MARITIME |
| 52022 | PEERLESS NUCLEAR CORP |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | 3.900 KILOHMS |
| FEAT | SPECIAL FEATURES | ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE ELECTRONICS SUPPLY CENTER PRODUCTION STANDARD NO. L03966; FOR NAVY NUCLEAR PROPULSION PLANT PRODUCTS ONLY |
| ADAQ | BODY LENGTH | 0.453 INCHES MINIMUM AND 0.471 INCHES MAXIMUM |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | NOT RATED |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | NOT RATED |
| AAQZ | INCLOSURE METHOD | ENCAPSULATED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYL | STYLE DESIGNATOR | RADIAL TERMINALS ONE END |
| AEFB | POWER DISSIPATION RATING IN WATTS | NOT RATED |
| CBME | CUBIC MEASURE (NON-CORE) | 0.207 CUBIC INCHES |
| ABPM | BODY DIAMETER | 0.750 INCHES NOMINAL |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100/+0.100 |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |