NIIN Output Data
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| LL-HX5-6325 | 14153 | A | 5 | 9 | 9 | KZ | ||
| KGT122A | 02750 | A | 3 | 1 | A | KZ |
CAGE Information
| Code | Company |
|---|---|
| 02750 | EATON AEROSPACE LLC DIV ELECTRICAL S |
| 14153 | DEFENSE LOGISTICS AGENCY DBA DEFENSE |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACTD | NUT DIAMETER | 0.372 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| AAWY | COUNTERBORE DIAMETER | 0.231 INCHES MINIMUM NUT AND 0.239 INCHES MAXIMUM NUT |
| CQJX | NOMINAL THREAD SIZE | 0.112 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| TEST | TEST DATA DOCUMENT | 81349-MIL-F-23199 SPECIFICATION |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | NOT RATED |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |
| ADBG | NUT THICKNESS | 0.145 INCHES MINIMUM AND 0.150 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| ADFK | NUT COUNTERBORE DEPTH | 0.067 INCHES MINIMUM NUT AND 0.104 INCHES MAXIMUM NUT |
| CRSQ | COUNTERSINK ANGLE | 82.0 DEGREES MINIMUM NUT AND 87.0 DEGREES MAXIMUM NUT |
| CMLP | THREAD QUANTITY PER INCH | 40 |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |