NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| QH-3 3A0192 | 62299 | A | 3 | 2 | 6 | AX |
CAGE Information
| Code | Company |
|---|---|
| 62299 | UNIVERSAL VISE AND TOOL CO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.125 INCHES NOMINAL |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.500 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| CSPY | LARGEST STEP DIAMETER | 0.687 INCHES NOMINAL |
| AMEB | FIRST END HOLE DEPTH | 0.107 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.3740 INCHES MINIMUM AND 0.4990 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
| AMDX | FIRST END HOLE DIAMETER | 0.1875 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |