NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 060094 | 59276 | F | 5 | 9 | 6 | AX | ||
| B60094 | 59276 | F | 3 | 9 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 59276 | BRUDI INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| ATPC | STEP QUANTITY | 2 |
| MATT | MATERIAL | STEEL |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 2.000 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI C1045 ASSN STD SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 3.480 INCHES NOMINAL |
| AAHP | SECOND END STYLE | INTERNAL THREADED |
| AMDL | FIRST END DIAMETER | 0.6225 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 1.5000 INCHES NOMINAL |