NIIN Output Data
NIIN:
NSN:
Item Name:
DELAY LINE
Definition:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 62Z07A100HY | 56289 | A | 5 | 2 | E | TX | ||
| M343-3 | 54418 | A | 3 | 2 | E | TX |
CAGE Information
| Code | Company |
|---|---|
| 54418 | MILTOPE CORPORATION DBA VT MILTOPE |
| 56289 | SPRAGUE ELECTRIC CO WORLD HQS |
Federal Supply Class
Title
MISCELLANEOUS ELECTRICAL AND ELE
Inclusions:
INCLUDES PERMANENT MAGNETS AND MAGNETOSTRICTION ELEMENTS; CAPS, CLIPS, AND CONTACTS, ELECTRICAL.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AZGM | MOUNTING FACILITY | PIN |
| APQL | FREQUENCY BANDWIDTH | NOT RATED |
| CCDN | DELAY TIME VARIATION METHOD | TAPPED |
| CCFF | TERMINAL TYPE AND QUANTITY | 7 PIN |
| AFGA | OPERATING TEMP RANGE | +0.0/+70.0 DEG CELSIUS |
| BZWM | SIGNAL DELAY METHOD | LUMPED CONSTANT |
| CCDS | SEGMENT DELAY TIME | 20.000 NANOSECONDS 1ST ROTOR SEGMENT NANOAMPERES PRIMARY INPUT |
| ACZB | FREQUENCY RATING | NOT RATED |
| AAQL | BODY STYLE | RECTANGULAR |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AKPV | MOUNTING FACILITY QUANTITY | 7 |
| CCDQ | SECTION DELAY TIME | 100.000 NANOSECONDS 1ST PRIMARY NANOAMPERES |
| ANSR | OUTPUT IMPEDANCE RATING | 100.000 OHMS |
| BHTH | ATTENUATION IN DECIBELS | NOT RATED |
| ANSL | INPUT IMPEDANCE RATING | 100.000 OHMS |
| CCDT | DELAY TIME VARIATION PER DEG CELSIUS | NOT RATED |
| AMSE | VOLTAGE RATING | 50.000 VOLTS NOMINAL |
| CCDX | PULSE RISE TIME RATING | 28.0 NANOSECONDS |
| ANNQ | MATERIAL AND LOCATION | PLASTIC BODY |
| ADAT | BODY WIDTH | 0.250 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.800 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | 7025-01-262-5007 DISK DRIVE UNIT |
| ARBR | BODY DEPTH | 0.195 INCHES MAXIMUM |
| CCDR | SEGMENT QUANTITY PER SECTION | 5 SINGLE SECTION |