NIIN Output Data
NIIN:
NSN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| S-2448168 | 88277 | A | D | 9 | A | AX | ||
| S2448168D86-0142 | 88277 | A | 3 | 2 | E | AX | ||
| 356-950596P0142 | 00624 | A | 3 | 2 | E | AX |
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
| 88277 | BOEING COMPANY THE DBA BOEING |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CQGM | MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE ERR-100 |
| CQHW | FIRST END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| CRFY | FLOW ANGLE | 120.0 DEGREES 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| AARX | INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-8794,SIZE 24 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 2ND END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKG | BOLT CIRCLE DIAMETER | 2.562 INCHES NOMINAL 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| ABKG | BOLT CIRCLE DIAMETER | 2.562 INCHES NOMINAL 2ND END |
| AEPR | FLANGE OUTSIDE DIAMETER | 3.094 INCHES NOMINAL 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBD | BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED COTTON CORD ERR-100 |
| AEPR | FLANGE OUTSIDE DIAMETER | 3.094 INCHES NOMINAL 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CRXX | MEASURING METHOD AND LENGTH | 14.250 INCHES NOMINAL OVERALL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CRLL | SECOND END FITTING/COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZED |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKU | FLANGE THICKNESS | 0.234 INCHES NOMINAL 1ST END |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 356.0 |
| ABKU | FLANGE THICKNESS | 0.234 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN 1ST END |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |