NIIN Output Data
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| RV4SBYSD753A | 81349 | M | 2 | 2 | E | TX | ||
| MIL-R-94/5 | 81349 | M | 4 | 1 | E | TX |
CAGE Information
| Code | Company |
|---|---|
| 81349 | MILITARY SPECIFICATIONS PROMULGATED |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEEA | SWITCH TYPE | ROTARY |
| ADAQ | BODY LENGTH | 0.719 INCHES MINIMUM AND 0.969 INCHES MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CBBL | FEATURES PROVIDED | SHAFT SEAL AND PANEL SEAL AND HUMIDITY PROOF AND SWITCH |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-94 SPECIFICATION |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| ABPM | BODY DIAMETER | 1.094 INCHES NOMINAL |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 3.000 AC |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 SINGLE SECTION |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFP | NONTURN DEVICE RADIUS | 0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | 0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 330.0 MINIMUM AND 340.0 MAXIMUM |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 117.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| CBME | CUBIC MEASURE | 0.778 CUBIC INCHES |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-94/5 GOVERNMENT SPECIFICATION |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFM | MAXIMUM STOP TORQUE | 128.00 INCH-OUNCES |
| ADAP | MOUNTING BUSHING LENGTH | 0.342 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AGAV | END ITEM IDENTIFICATION | 5895-01-138-5644 SENSOR MONITORI |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 75.0 KILOHMS SINGLE SECTION |
| AEFL | MAXIMUM RUNNING TORQUE | 6.00 INCH-OUNCES |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 330.0 MINIMUM AND 340.0 MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |