NIIN Output Data
Definition:
AN ITEM FABRICATED FROM ELECTRICALLY NONCONDUCTIVE MATERIAL SPECIFICALLY DESIGNED TO PROVIDE A SUPPORT FOR MOUNTING AN ELECTRICAL AND/OR AN ELECTRONIC COMPONENT SUCH AS A SEMICONDUCTOR DEVICE, RELAY, OR RESISTOR INTO THE NEXT HIGHER ASSEMBLY. IT ISOLATES THE COMPONENT FROM THE MOUNTING SURFACE OF THE NEXT HIGHER ASSEMBLY, IT MAY ACT AS A STRAIN RELIEF TO AVOID DAMAGE TO THE COMPONENT SEAL, AND IT MAY PERMIT SOLDERING OF THE COMPONENT TO THE NEXT HIGHER ASSEMBLY WITHOUT DAMAGE. IT INCLUDES HOLES, NOTCHES, OR OTHER PROVISIONS FOR PHYSICAL ALIGNMENT AND SPACING OF ELECTRICAL LEADS AND/OR OTHER MOUNTING FACILITIES PROJECTING FROM THE COMPONENT IT MOUNTS. IT MAY ALSO AFFORD PROTECTION FROM SHOCK OR VIBRATION. IT MAY BE EITHER NONTHERMALLY CONDUCTIVE WHICH PROTECTS THE COMPONENT FROM TEMPERATURE CHANGES IN THE NEXT HIGHER ASSEMBLY OR IT MAY BE THERMALLY CONDUCTIVE WHICH PERMITS HEAT GENERATED IN THE COMPONENT TO BE DRAINED OUT TO A HEAT SINK. FOR ITEMS WHOSE FUNCTION IS ELECTRICAL INSULATION ONLY, SEE INSULATOR, (AS MODIFIED). EXCLUDES HOLDER, (AS MODIFIED); RETAINER, (AS MODIFIED), AND SPACER, PLATE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| RC-CS-270050-1V | 19080 | A | 5 | 9 | 5 | TX | ||
| 10589N | 0ZK84 | A | 5 | 2 | 5 | ZZ | ||
| 44-00073-001 | 21562 | A | 3 | 2 | A | TX | ||
| RC-CS270050-IV | 19080 | A | 5 | 2 | 5 | TX |
CAGE Information
| Code | Company |
|---|---|
| 0ZK84 | MICRO-DIMENSIONAL PRODUCTS |
| 19080 | ROBISON ELECTRONICS INC |
| 21562 | GENERAL DYNAMICS OTS AEROSPACE INC. |
Federal Supply Class
Title
MISCELLANEOUS ELECTRICAL AND ELE
Inclusions:
INCLUDES PERMANENT MAGNETS AND MAGNETOSTRICTION ELEMENTS; CAPS, CLIPS, AND CONTACTS, ELECTRICAL.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | PLASTIC |
| HUES | COLOR | NATURAL |
| ABVG | MOUNTING SLOT LENGTH | 0.225 INCHES MINIMUM SINGLE MOUNTING FACILITY AND 0.235 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| AAQL | BODY STYLE | RECTANGULAR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-46161,GRADE B,CLASS 3 MIL SPEC SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 1 SLOT SINGLE MOUNTING FACILITY |
| ABKW | OVERALL HEIGHT | 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |