NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| DAA3131D698-001 | 81205 | A | 3 | 2 | E | AX | ||
| DAA3131D698 | 81205 | A | D | 9 | A | AX |
CAGE Information
| Code | Company |
|---|---|
| 81205 | THE BOEING COMPANY DBA BOEING DIV DE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDS | FIRST END PITCH DIAMETER | 0.9166 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.8470 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 0.899 INCHES NOMINAL |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.998 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.039 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.9580 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.8710 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| MATT | MATERIAL | STEEL |
| BDSQ | FIRST END SPLINE QUANTITY | 22 |
| ATPC | STEP QUANTITY | 5 |
| AAHN | END SIMILARITY | IDENTICAL |