NIIN Output Data
Definition:
A CIRCULAR-SHAPED ITEM DESIGNED TO MAINTAIN PREDETERMINED DISTANCE BETWEEN ASSEMBLED PARTS AND/OR FOR DISTRIBUTING PRESSURE OR PREVENTING ENDWISE MOVEMENT BETWEEN MEMBER PARTS. IT HAS A SOLID CROSS-SECTION AND TWO FLAT PARALLEL BEARING SURFACES. THE DISTANCE BETWEEN THE BEARING SURFACES PERPENDICULAR TO THE AXIS OF THE CENTRALLY LOCATED HOLE SHALL NOT EXCEED 25 PERCENT OF THE OUTSIDE DIAMETER. THE DIAMETER OF THE CENTRALLY LOCATED HOLE MUST EXCEED 75 PERCENT OF THE OUTSIDE DIAMETER. EXCLUDES LAMINATED ITEMS. FOR ITEMS MANUFACTURED FROM IMPREGNATED GRAPHITE OR LUBRICATED NONMETALLIC MATERIALS, EXCLUDING FELT OR PLASTICS, SEE GASKET. FOR ITEMS MANUFACTURED FROM LUBRICATED PLASTICS, SEE BEARING, WASHER, THRUST. FOR ITEMS MANUFACTURED FROM LUBRICATED FELT, SEE FELT, MECHANICAL, PREFORMED. EXCLUDES DISK, VALVE; INSULATOR WASHER; AND SHIM. SEE ALSO SPACER, PLATE AND SPACER, SLEEVE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 744820-5 | 99167 | A | 3 | 2 | A | KZ |
CAGE Information
| Code | Company |
|---|---|
| 99167 | HAMILTON SUNDSTRAND CORPORATION |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AARX | INSIDE DIAMETER | 2.165 INCHES MINIMUM AND 2.195 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| MATT | MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304 |
| ADUM | OVERALL THICKNESS | 0.2238 INCHES MINIMUM AND 0.2248 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| ABHE | OUTSIDE DIAMETER | 2.410 INCHES MINIMUM AND 2.440 INCHES MAXIMUM |