NIIN Output Data
NIIN:
NSN:
Item Name:
RESISTOR , FIXED , WIRE WOUND , INDUCT
Definition:
INC 37403 REINSTATED ON 010303~A RESISTOR WHOSE OHMIC VALUE CANNOT BE ADJUSTED OR VARIED. THE RESISTANCE ELEMENT CONSISTS OF HIGH RESISTANCE WIRE (OR RIBBON) EITHER WOUND ON AN INSULATED FORM OR CONSTRUCTED SO AS TO BE SELF-SUPPORTING. THE ITEM MUST HAVE INHERENT CHARACTERISTICS OF INDUCING SELF-INDUCTANCE. OPPOSITION TO CURRENT FLOW IS AN INHERENT PROPERTY OF THE RESISTANCE WIRE AND IS MANIFESTED BY THE HEAT DISSIPATION IN THE RESISTOR. EXCLUDES SUPPRESSOR, IGNITION INTERFERENCE. SEE ALSO RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| RH5-0.02OHM1PCT | 91637 | A | 5 | 2 | E | TX | ||
| 995601-015 | 81413 | A | 3 | 2 | A | TX |
CAGE Information
| Code | Company |
|---|---|
| 81413 | BAE SYSTEMS INFORMATION AND ELECTRON |
| 91637 | VISHAY DALE ELECTRONICS INC. DIV VIS |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABJT | TERMINAL LENGTH | 0.200 INCHES MINIMUM AND 0.324 INCHES MAXIMUM |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0/+50.0 |
| ADAQ | BODY LENGTH | 0.569 INCHES MINIMUM AND 0.631 INCHES MAXIMUM |
| BYML | MOUNTING HOLE SIZE | 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.305 INCHES MINIMUM AND 0.335 INCHES MAXIMUM |
| AEFB | POWER DISSIPATION RATING IN WATTS | 5.000 FREE AIR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| STYL | STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| AAQZ | INCLOSURE METHOD | ENCASED |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0/+275.0 |
| AAPP | ELECTRICAL RESISTANCE | 0.020 OHMS |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 0.439 INCHES MINIMUM AND 0.449 INCHES MAXIMUM |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000/+1.000 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| ADAT | BODY WIDTH | 0.319 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AARB | TERMINAL TYPE | TAB, SOLDER LUG |