NIIN Output Data
NIIN:
NSN:
Item Name:
GEAR , ANTIBACKLASH , SPUR
Definition:
AN ITEM HAVING ONE FIXED GEAR AND ONE FREE GEAR, BOTH HAVING THE SAME COMPLEMENT OF SPUR GEAR TEETH, MOUNTED ON A COMMON HUB. THE FREE GEAR IS ATTACHED TO THE FIXED GEAR BY SPRINGS AND OPERATES AS ONE GEAR. UPON INSTALLATION WITH THE MATING GEAR, THE TEETH OF THE FREE MOVING GEAR ARE PRESET TO MESH WITH TEETH OTHER THAN THOSE OF THE FIXED GEAR. THIS SPRING TENSION BETWEEN THE FIXED GEAR AND THE FREE GEAR ELIMINATES ANY FREE MOTION BETWEEN THE DRIVER AND THE DRIVEN GEAR. THE GEAR IS USED WHERE IDENTICAL AND ACCURATE TRANSMITTED MOTION BETWEEN GEARS IS REQUIRED.
Reference/Part Number
Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
---|---|---|---|---|---|---|---|---|
Z3H153-P1 | 00328 | A | 3 | 2 | 6 | AX | ||
S9703ANZ3H153-P | 00328 | A | 3 | 2 | 5 | AX |
CAGE Information
Code | Company |
---|---|
00328 | DESIGNATRONICS INCORPORATED DBA STER |
Federal Supply Class
Title
GEARS, PULLEYS, SPROCKETS, AND T
Inclusions:
INCLUDES POWER TRANSMISSION CHAIN; MATCHED GEAR SETS.
Exclusions:
EXCLUDES REDUCTION GEARS (FSC 3010).
Characteristics (Decoded)
MRC | Requirements Statement | Clear Text Reply |
---|---|---|
CWXB | FIRST STEP NOMINAL DIAMETER | 0.495 INCHES FIRST END |
MATT | MATERIAL | STEEL COMP 303 OVERALL |
CWTR | HUB STYLE DESIGNATOR | 1 STEP FIRST END |
CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
CWWH | END NOMINAL LENGTH | 0.180 INCHES FIRST END |
FEAT | SPECIAL FEATURES | HUB HAS SPLIT 0.180 IN. LG FROM END |
CWRM | FACE NOMINAL WIDTH | 0.104 INCHES |
CWWS | FIRST STEP NOMINAL LENGTH | 0.041 INCHES FIRST END |
STYL | STYLE DESIGNATOR | PROTRUDING HUB |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.221 INCHES FIRST END |
AJLA | TEETH QUANTITY | 153 |
ANTP | BORE STYLE | PLAIN BOTH ENDS |
CWWN | END NOMINAL DIAMETER | 0.187 INCHES FIRST END |
CWRS | BORE NOMINAL DIAMETER | 0.125 INCHES BOTH ENDS |
AGJS | PITCH DIAMETER | 1.5938 INCHES NOMINAL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
CWCD | NOMINAL OUTSIDE DIAMETER | 1.615 INCHES |
CWNH | TOOTH FORM | STANDARD |