NIIN Output Data
Definition:
A MEASURING TOOL CONSISTING OF A METAL BODY (LONG LEG) AND A TONGUE (SHORT LEG) FORMING A 90 DEGREE (1.6 RADIANS) ANGLE. BOTH THE BODY AND THE TONGUE MAY BE OF THE SAME THICKNESS OR MAY BE TAPERED FROM THE APEX TO THE END OF EACH LEG. THE ITEM IS GRADUATED EITHER ON BOTH EDGES OR THE OUTSIDE EDGES ONLY. MAY BE INSCRIBED WITH ONE OR MORE REFERENCE TABLES AND IF WITHOUT REFERENCE TABLES, THE ITEM IS GRADUATED IN INCREMENTS NO SMALLER THAN 1/32 INCH (0.8 MM).
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 430 | 63474 | A | 3 | 2 | 4 | 75 | ||
| 430 JOHNSON LEVEL | 00NS2 | A | 5 | 2 | 4 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 00NS2 | KIPPER TOOL COMPANY |
| 63474 | JOHNSON LEVEL AND TOOL MFG CO INC |
Federal Supply Class
Title
MEASURING TOOLS, CRAFTSMEN'S
Inclusions:
INCLUDES CALIPERS; LEVELS; MICROMETERS; PLUMB BOBS; PRECISION TAPES; SQUARES; ANGLE GAGES; CENTER GAGES; DEPTH GAGES; DRAW GAGES; DRILL POINT GAGES; FILLET AND RADIUS GAGES; GLAZIERS' GAGES; HEIGHT GAGES (VERNIER); PLANER GAGES; RIVET SELECTOR GAGES; SAW TOOTH SET GAGES; SCREW PITCH GAGES; SURFACE GAGES; TELESCOPING GAGES; THICKNESS GAGES; TUBE BEAD GAGES; TUBE FLARE GAGES; TWIST DRILL GAGES; TWIST DRILL AND ROD GAGES; TWIST DRILL AND TAP GAGES; TAPER-WIRE-THICKNESS GAGES; WIRE GAGES; TOOL SETTING PLANER AND SHAPER GAGES; GAGE BLOCKS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACUL | TONGUE LENGTH | 8.000 INCHES |
| APGF | DESIGN TYPE | ONE-PIECE |
| CMTC | BLADE EDGE SMALLEST GRADUATION UNIT | 1/8 INCH |
| MATL | MATERIAL | STEEL |
| ADAQ | BODY LENGTH | 12.000 INCHES NOMINAL |