NIIN Output Data
NIIN:
NSN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| PMD7900-6-A-2 | 0HDW7 | A | 5 | 2 | 5 | ZZ | ||
| 5191409-3 | 53711 | A | 3 | 2 | A | KZ | ||
| PMD7900-6-A-2 | 97928 | R | 5 | 9 | 5 | KZ |
CAGE Information
| Code | Company |
|---|---|
| 0HDW7 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
| 53711 | NAVAL SEA SYSTEMS COMMAND |
| 97928 | HUCK INTL INC |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| SFTT | SURFACE TREATMENT | CADMIUM FASTENER |
| AASB | FASTENER LENGTH | 0.385 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE FASTENER |
| ABQZ | INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| CQFM | HARDNESS RATING | 34.0 ROCKWELL C MINIMUM FASTENER AND 38.0 ROCKWELL C MAXIMUM FASTENER |
| MATT | MATERIAL | STEEL COMP 316 PRIMARY WASHER |
| MATT | MATERIAL | STEEL COMP 304 PRIMARY WASHER OR STEEL COMP 301 PRIMARY WASHER OR STEEL COMP 302 PRIMARY WASHER OR COPPER ALLOY 360 STAND-OFF |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE PRIMARY WASHER |
| AAJD | THREAD CLASS | 2A |
| MATT | MATERIAL | STEEL COMP 4037 FASTENER |
| AASL | HEAD DIAMETER | 0.317 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.098 INCHES MINIMUM AND 0.160 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM STAND-OFF |
| SFTT | SURFACE TREATMENT | PASSIVATE PRIMARY WASHER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AHYM | NOMINAL THREAD DIAMETER | 0.138 INCHES |