NIIN Output Data
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| DAA7278D088-003 | 1W025 | A | 3 | 2 | 6 | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 26.500 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.9960 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| AMDH | FIRST END DISTANCE FROM KEYWAY CENTER TO END | 0.710 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.125 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 1730-01-268-9238 |
| ATPC | STEP QUANTITY | 3 |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2510 INCHES MINIMUM AND 0.2530 INCHES MAXIMUM |
| AAGZ | FIRST END STYLE | WOODRUFF KEYWAY |
| AAHN | END SIMILARITY | IDENTICAL |
| MATT | MATERIAL | STEEL COMP 4130 |