NIIN Output Data
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
Reference/Part Number
| Part Number | CAGE | Status | RNCC | RNVC | DAC | RNAAC | MSDS | SADC |
|---|---|---|---|---|---|---|---|---|
| 1907-1395 ITEM 9 | 09176 | A | 5 | 2 | E | ZZ | ||
| N2294 | 09176 | A | 3 | 2 | E | ZZ | ||
| 1907-1395 | 09176 | A | D | 9 | A | ZZ |
CAGE Information
| Code | Company |
|---|---|
| 09176 | PARKER-HANNIFIN CORPORATION DBA PNEU |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | SEAWOLF CLASS (SSN) |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.2900 INCHES MINIMUM AND 2.3120 INCHES MAXIMUM |
| AMDS | FIRST END PITCH DIAMETER | 2.2500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AMDL | FIRST END DIAMETER | 2.3120 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 2.5000 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 17-4PH |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 2.1510 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A276 ASSN STD SINGLE MATERIAL RESPONSE |
| BDSQ | FIRST END SPLINE QUANTITY | 36 |